JPL Weathertouch main image

JPL Weathertouch

By JPL Innovations Pvt. Ltd.

Premium Exterior Emulsion • Anti-Fungal • Superior Washability

JPL Weathertouch is a premium exterior emulsion specially developed for areas exposed to high moisture and humidity. Its anti-fungal formulation prevents wall damage, while the smooth finish and superior washability ensure long-lasting beauty and easy maintenance. Water-based, weather resistant, and smooth finishing.

Anti-Fungal Protection
Prevents surface deterioration in moisture-prone and high-humidity areas.
Superior Washability
Easy maintenance — passes 4000 oscillations with no film defects.
Weather Resistant
Withstands rain, humidity and sunlight — 21-day accelerated weathering: 95/100.
BIS-Tested — IS-15489
Conforms to all 15 IS-15489 tests including weathering and resistance to alkali.
Buy Now
Call to place your order

Product Overview

JPL Weathertouch is engineered as a premium exterior emulsion for moisture-prone façades. Water-based and exterior-grade, with a viscosity of 45 sec at 30 °C, weight of 1.26 kg/L and pH of 8, it is built for professional façades subjected to humidity, rain and microbial growth pressure.

BIS-tested to IS-15489 — conforms to all 15 tests including 21-day accelerated weathering with a 95 assessment score. Coverage 1000–1200 sq.ft per 20 L in two coats. Available in 1 L, 4 L and 20 L packs.

Technical Advantages

A water-based premium exterior emulsion engineered for anti-fungal protection, superior washability, and weather resistance — BIS-tested to IS-15489 with a 95/100 accelerated weathering score.

1

Anti-Fungal Formulation

Prevents wall damage and surface deterioration in damp, humid and moisture-prone conditions.

2

Superior Washability

Easy maintenance for lasting beauty — passes 4000 oscillations with no film defects.

3

Weather Resistant

Withstands rain, humidity and sunlight — proven over 21 days of accelerated weathering.

4

Smooth Premium Finish

Smooth finish gives walls an elegant, premium look on residential and commercial façades.

5

Water-Based Eco-Friendly

Low odour formulation — easier to apply and safer for the surrounding environment.

6

BIS-Tested — IS-15489

Conforms to all 15 IS-15489 tests including alkali resistance, gloss and consistency.

JPL Weathertouch

📄 Download JPL Weathertouch TDS

Coverage

Substrate Coverage
Smooth exterior surfaces1000–1200 Sq.ft per 20 litre (two coats)
Textured / masonry surfaces1000–1200 Sq.ft per 20 litre (two coats)

Note: Coverage may vary based on surface porosity, application method, dilution and texture. Conduct a site trial before full application.

BIS Test Results — IS-15489 Compliance

BIS Test Report — IS-15489 Compliance (15 tests).

S.No Test Observation Conformity
1Conditions in the ContainerFree from odour of putrefaction, lumps and skins; no settling.Yes
2OpacityPasses the test.Yes
3ThinningMixes readily with water, smooth and homogeneous; minimum foaming.Yes
4Application PropertiesSuitable for brush, spray or roller; no pigment flocculation or coarseness.Yes
5Recoating PropertiesPasses the test.Yes
6FinishSmooth and uniform.Yes
7Accelerated Storage StabilityPasses the test.Yes
8ColourWhite — close match to IS colour specified.Yes
9Washability and CleanabilityPasses after 4000 oscillations; no film defects observed.Yes
10aDrying Time — Surface Dry20 minutes (spec: 45 minutes max).Yes
10bDrying Time — Hard Dry2 hours 10 minutes (spec: 4 hours max).Yes
11ConsistencyPasses the test.Yes
12Gloss, 60°6 (spec: 0–10).Yes
13Mass in kg / 10 L13.3 (within ±3% of approved sample).—
14Resistance to AlkaliPasses the test.Yes
15Accelerated Weathering (21 days)Assessment total 95 (spec: minimum 50% of base values).Yes

Sub-tests under accelerated weathering: Correct Colour 20/25 (slight change observed), Freedom from Flaking 25/25, Freedom from Cracking 25/25, Freedom from Chalking 25/25.

←